Please make sure to use PETG as this will be holding nearly 6kg of weight

Make sure to follow this exact settings to make sure the strength and a smooth print

Material : PETG or PETG-CF 

Infill : 30%

Thickness 0.2mm

Support : ON

And you will need :

Aluminum or Steel Bar : Size 16.5mm x 16.5mm or 42mm x 16.5

Self tapping Screws : 8

Anti Slip Rubber Stricker ( MANDATORY)

IMPORTANT : PLEASE CHECK THE PHOTOS FOR PROPER AND SAFE INSTALLATION. DO NOT SKIP THE PHOTOS…!!!

Drop a comment if you want to know any details :)