Summary

a simple printed kerf maker for woodworking. You use this to set up your stops.

requires 2 m5x30 screws, 2 m5 nuts, 1 m3x25 screw and one m3 nut. you use the m5's to tighten the kerfblocks together after measuring the stock, and the m3 is adjusted to the kerf of your sawblade.

check YouTube for usage (search kerfmaker)

I based this design off of a combination of Jay Bates and Pask Makes designs...

7/8/2020
Redesigned based on feedback. models are oriented for best printing. Depending on your printer, you may need a brim.

Required hardware: 1 m5x25 screw, 1 m5 washer,1 m5 nut, and 1 m3x12 screw.