Summary

This is a table saw fence or router fence or any other kind of woodworking machine fence T Track Fence Stop. I found this on GrabCAD (https://grabcad.com/library/t-track-flip-stop-1), made by L. Burkhart (https://grabcad.com/l.burkhart-1) so all of the credit for the design goes to that person. I then separated it in Fusion 360 then exported it to an .stl file. I am not sure if the dimensions are correct as I have never used Fusion before so I did it as best I could. I'll print it as it is and make size adjustments as I go.

Update: I see now that i need to separate the parts into individual stl's. and one of the pieces needs to be hollowed out.

Update: I was able to separate the individual files into their own .stl.

Update 3-11-20: I scaled the parts to 125% because they looked small on the slicer bed (I am using Ideamaker). It will need a T-Bolt instead of the T-Head.stl.and a nut that will go into the knob. Not sure how I will lock the nut it. Maybe with some epoxy The "Socket will need to be replaced with a hex bolt ( not sure of the size yet).
The "Pin" goes into the T-TrackFlipstoplock and Flipstop is very tight and will not go in the Flip Stop all the way. It looks like it is supposed to be flush in the Flipstop. I'll keep working on it until I get it right.

Thanks to those who have "Liked" this and had left comments in the original post I left.