"Grant me a wish, my beautiful star ! " This model is in 2 parts : the faerie and the shooting star. the star will be printed flat, and you can glue it in a notch in the floor behind the faerie. you can print them without any support. The faerie can be printed at 70 % of the original scale without problem for a faster print. Don't go under or you can get problem with the wings. tested with slic3r 1.2.9 and simplify 3d recommanded parameters : 0.15mm layer height, 15% infill, 2 perimeters for the Faerie 0.2mm layer height, 10% infill, 2 perimeters for the shooting star