4 different sizes of Goku models.

Print once in the size of 79x140 or in pairs in the size of 113x200

Project: goku .hfp

Print with 100% infill, layer height of 0.08 mm, and base layer of 0.16 mm

The dimensions of this model are

78.8x140 mm, and you can do it at a thickness of less than 0.48 mm.

Print at a higher layer height, with a maximum depth of 2.2 mm and an actual depth of 2.2 mm.

The filament used:

PLA Smartfil Black, transmission distance: 0.4

PLA BambuLab Basic Red, transmission distance: 4

PLA BambuLab Basic Yellow, transmission distance: 6

PLA Jayo White, transmission distance: 6

This print uses 4 unique filaments

Exchange instructions:

Starting from black,

Switch to red at layer #10

Switch to yellow on layer #14

On the #19 layer