Fast and easy to print Gridfinity Base for Ikea Alex Drawer (36x70 cm). The printfile contains 5 plates with all necessary parts for 1 drawer.

If your looking for bins, I've an ultimate collection for that.

• Plate 1
  • Grid 4x5
• Plate 2
  • Grid 4x5
• Plate 3
  • Grid 3x5
  • Grid 2x4
• Plate 4
  • Grid 3x5
  • Grid 2x3
• Plate 5
  • Spacer
• Plate 6 (optional)
  • 23x Connector (22 needed + 1 spare)
    Needed if the grid is to loose or you don't want a full grid in your drawer

PLA printtime: ~3:55h and 116,9g material (single color)

PETG printtime: ~4:25h and 115,0g material (single color)

I recommend to put the 2 small grids and the spacer in the back of the drawer.

The grid can be printed in PLA or PETG. I recommend 0.4mm nozzle and 0.2mm layer height.

Additional Tools and Helpers

• Gridfinity Height ruler - slim Edition: Helps you to find the correct bin height.
• AIO parametric Gridfinty Project: Generate you own gridfinity bin.
• Slim Gridfinity Base for Ikea Alex: Perfectly fitting grid for Ikea Alex Drawer

Source:
Gridfinity Base
Spacer

A1 mini Edition:

I've included a profile for all A1 mini user out there. Basically you'll need three 4x4-Grids and three 3x4-Grids. The Spacer is cut in half, so it fits the print plate. You don't need to glue them together. Just use some connectors. The connectors are optional. You just need them if you don't fill the drawer space all with bins.