Slicer: Cura
Material: PETG (CRON)

🔧 Nozzle & Layer
- Nozzle Diameter: 0.4 mm
- Layer Height: 0.16 mm
- Initial Layer Height: 0.16 mm

🌡 Temperatures
- Nozzle Temperature: 235 °C
- Bed Temperature: 80 °C

🚀 Speeds
- Print Speed: 32.5 mm/s
- Travel Speed: 150 mm/s
- Initial Layer Speed: 15 mm/s

🔁 Retraction
- Retraction Enabled: Yes
- Retraction Distance: 2.5 mm
- Retraction Speed: 40 mm/s
- Retraction Minimum Travel: 1.5 mm

🌬 Cooling
- Fan Speed: 40%
- Initial Fan Speed: 0%
- Fan Full On at Layer: 4

🧲 Adhesion
- Build Plate Adhesion: Brim (optional)
- Bed Surface: Creality Ender-3 V2 Neo & Ender-3 S1 Build Plate 

⚙ Supports Supports: No

🧪 Notes
- Printed without supports
- This item fits perfectly on the windscreen wash fluid res