A deep, cone-shaped scoop designed for handling loose powders, reagents, and chemicals. Special Design Feature: The tip of the cone is printed as a separate piece. This design choice ensures the tip remains perfectly sharp and clean, avoiding the common printing defects found at the bottom of pointed overhangs.

⚠ Material Note: Not for food

Key Features:

• Sharp Tip: The separate tip guarantees precise pouring without printing artifacts.

• Deep Shape: Prevents lightweight powders from spilling.

• Versatile: Ideal for lab work, reloading, or precise filling of small containers.

Assembly Instructions

English:

1. Print both parts: the bodyand the cone.

2. Apply a small drop of CA glue (Superglue) or specific plastic glue to the connection point at the bottom of the scoop.

3. Press the tip firmly into place and let it set. Tip: Ensure the surfaces are clean and dry before gluing.

Print Instructions

• Material: PLA, PETG (Recommended for durability), or PP.

• Nozzle: 0.4 mm

• Layer Height: 0.12 - 0.16 mm (High quality recommended for smooth mating surfaces).

• Supports:

  • No (Print flat side down).

• Brim: Recommended for the small tip part to prevent it from detaching during printing.