This insert fits the retail box and neatly stores all expansions, even with thick-sleeved cards. Cards are quick to grab thanks to wide finger gaps and a slightly raised lift, so you’re not pinching or digging around while getting the cards out.

It also includes a dedicated dice storage for 12× 16 mm dice. The dice are stacked to minimize rattling, even if you don’t fill every slot, while still staying easy to remove.

The insert can be printed with either a 0.4mm or 0.6mm nozzle.

• 0.6 mm nozzle (recommended):

  • 1 perimeter

  • 10% infill

  • Arachne wall generator

  • Manually move the seam away from the inside of the dice slots to prevent interference.

• 0.4 mm nozzle:

  • 2 perimeters

  • 10% infill

  • Manually move the seam away from the inside of the dice slots to prevent interference.