Print with a 100% fill rate, a layer height of 0.08 mm, and a base layer height of 0.16 mm

The model size is 200x175.36mm.
You can use a higher layer height for printing at a minimum depth of less than 0.48mm
The maximum depth is 2.2mm, and the actual depth is 2.3mm.

Consumables used:
Bambu Lab matte charcoal black PLA, transmission distance: 0.6
Bambu Lab Basic Blue PLA, transmission distance: 4
Bambu Lab basic red PLA, transmission distance: 4
Bambu Lab basic beige PLA, transmission distance: 8
Bambu Lab basic orange PLA, transmission distance: 7
Bambu Lab basic yellow PLA, transmission distance: 6
Bambu Lab Basic Ivory White PLA, transmission distance: 5
This print uses 7 unique consumables

Replacement instructions:
Start with blue
Switch to red at the 9th layer
Switch to beige at the 12th layer
Switch to orange at the 17th layer
Switch to yellow at the 18th layer
Switch to jade white at the 20th layer
Switch to blue at the 29th layer