Mounting clip for the RAKWireless WishMesh Pocket V2 via a threaded insert and optional bolt in the base.  By default it is configured for a 3/8"-16 threaded insert, which is a standard thread for mounting photography accessories and allows use of monopods as an improvised mast.  Cutouts in the clip allow access to all the radio's controls and the USB-C port on the bottom.  With the radio removed, a bolt or socket head cap screw can be installed in the threaded insert in case the clip needs to be mounted to a something with a female thread.

The radio is installed and removed from the clip by flexing the arms to each side and moving the radio vertically.  The clip is a snug fit so trying to rotate it into place will not work.

The OpenSCAD model file is included for any remixing or personalized adjustments such as changing the threaded insert, adapting to other cases, etc.  I found printing in PETG to occur without issue, but ASA requires a brim to keep the thin arms attached to the build plate.  I recommend supports for the insert pocket and the lower fingers to maintain the precise dimensions.