Project: Mayan-bookmark-v2.hfp
Print with a 100% fill rate, a layer height of 0.08mm, and a base layer height of 0.16mm.

The model size is 30x120mm.
You can print with a higher layer height at a minimum depth of less than 0.24mm.
The maximum depth is 2.2mm, and the actual depth is 1.7mm.

Consumables used:
PLA BambuLab basic black consumables transmission distance: 0.2

PLA BambuLab basic gray consumables transmission distance: 2
The transmission distance of the PLA general-purpose silk copper-colored consumables is 3 meters.
PLA BambuLab basic ivory-white filament transmission distance: 5
This printer uses four unique consumables

Switching command:
Starting with black
Switch to gray on the 9th layer
Switch to silk copper color on the 10th layer
Switch to jade white for the remaining part on the 13th layer