The layered relief of Jinx generated by HueForge

Print with 100% infill at a layer height of 0.08mm, with a base layer of 0.16mm.

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black.
At layer #9 (0.8mm), switch to Gray.
At layer #13 (1.12mm), switch to Gray.
At layer #18 (1.52mm), switch to White for the rest.

You can follow my Bilibili account to get more interesting model files:

https://space.bilibili.com/23305786