Prusa LED Holder.
You will need a small led strip and an aluminum L-bracket.
The led strip has to work at 24V. The aluminum L-bracket is 1.5mm thick.
Paint the outside of the aluminum black.
Stick the led strip with cable to the aluminum.
Connect to 24V direct through a 2A fuse.

Soporte LED Prusa.
Se necesitan una pequeña tira de led y un soporte en L de aluminio.
La tira led tiene que funcionar a 24V. El soporte en L de aluminio mide de grosor 1,5mm.
Pintar de negro la parte exterior del aluminio.
Pegar la tira de led con cable al aluminio.
Conectar a 24V directo a través de un fusible de 2A.

Prusa

I3 MK3S

Doesn't Matter

Doesn't Matter

0.15

20

Prusa LED Holder.
You will need a small led strip and an aluminum l-bracket.
The led strip has to work at 24V. The aluminum l-bracket is 1.5mm thick.
Paint the outside of the aluminum black.
Stick the led strip with cable to the aluminum.
Connect to 24V direct through a 2A fuse.

Soporte LED Prusa.
Se necesitan una pequeña tira de led y un soporte en l de aluminio.
La tira led tiene que funcionar a 24V. El soporte en l de aluminio mide de grosor 1,5mm.
Pintar de negro la parte exterior del aluminio.
Pegar la tira de led con cable al aluminio.
Conectar a 24V directo a través de un fusible de 2A.