Made this headphone hanger for the lamp next to my bed. 
**You need to print the parts seperatly, and therefor cannot print the stl directly.**
It is design to be able to go around a pole that is a maximum of **1.9cm** in diameter.
The angle of the holder is made for my lamp, but will probably work for most things, like a headphone lamp hanger / mount. If you with to have another angle, you can edit the files yourself, or leave a comment (then I maybe make another file).
**The .3mf file is from Bambu Studio, and will maybe cause problems in other slicers, especially as scarf seam is on**

I did not end up using the clip insert, but you may have a different experience.
EDIT: The small arm broke of due to the clip breaking. I think using the clip insert will help with distributing the load on both parts of the clip.

All the files are exported from Fusion360. I cannot test if the SketchUp and Inventer files work.

Print Settings

Printer Brand:

Bambulabs

Printer: 

Bambu X1C

**Rafts:**

No

Supports: 

Yes

**Resolution:**

0.16mm

Filament: Bambu PLA or PLA-CF