My racing sim rig had screws that required me to constantly use an allen key so I could remove them and readjust the steering wheel height between different users. The screws were also quite long so it took a while to unwind them.
With these thumb screws, I could put an M8 bolt through, readjust my sim rig and tighten it up in a few turns. The sim rig is still solid, the screws don't come loose as you can get a very firm grip on the thumb screws to tighten them.

Layer height 0.2mm
Infill 33%
2 Wall loops
Didn't need support or brims etc.