The Dual Gotek case is for a vertical mount like in the Heathkit H89. The OLED screen mounts are designed for a 128 x 64 OLED available on Amazon. You can mount a floppy disk drive next to it or use the bracket to fill the open gap. The bracket has pins to fit in the Gotek mounting holes. The bracket has screw holes to match the H89 disk drive mount.

I added a second filler bracket that supports a third Gotek drive with a 128x64 OLED

The nut is a replacement for the rotary encoder nut in case the metal one is lost. Use the nut driver to thread it on the rotary encoder. The nut is not printed with threads.

Designed using Fusion 360. The base design was my 3.5" Gotek case and was influenced by Scott Campbell's design for the new Goteks with an OLED screen. The design makes use of referenced dimensions and mirror lines to make it easy to modify the design to match the actual Gotek unit. Examples are the upper mounting posts, rotary encoder holes, USB holes, and the OLED holes.

Bambulabs

Bambu X1C

No

Yes

0.012mm

15

I printed it face down and limited supports to the upper mounting pins. Most features are fillited to allow for printing without supports.