As I found myself in need of an upgrade from the standard edition.
I created this upgrade, for better cooling and accessibility.
I've directed the Wifi module on the top, for the best reception.

The original display can be just peeled and fits straight in the connector from the BitDsk.
It is also advisable to upgrade the fan and cooler (As visible in my pictures.
The fan will be spinning on 100%, for some fans this is not a problem noise wise,but you can put a 2.5Ω resistor inline to make the fan go 90%, or a 5Ω resistor to let the fan run for 80%
You can do different calculations for the resister value for different speeds.
Just be sure that the fan gives enough cooling regarding your settings!
For example: If you gonna use a 10 Ω resistor, it won't cool enough and you might burn your ASIC, so this is totally your own responsibility!

Keep on hashing coins!
Keep on printing upgrades!

PS:Be sure to use the “Tree Support”