For e.g. model gliders:
installing of servos in the wings including servoframes using adhesive methods with e.g. 2 component adhesives needs to keep the servos in place as long the adhesive is still not hard.
This is a tool which keeps the servos in place. Sometimes you need 4 or more those tools at a time so I made it as cheep as possible with printed threads.

It is easy to print: no supports, you can use PLA or PETG or ABS+

Layer height is 0.2 mm

printing time: <35 minutes

Prusa

i3 MK2S

No

No

0.2

50%

It is easy to print: no supports, you can use PLA or PETG or ABS+
Layer height is 0.2 mm
printing time: <35 minutes