These days, this meme has brought me a lot of joy, so I also want to do my part and share it with everyone.

I contacted the original author, tidiestflyer on DeviantArt, and obtained his authorization to publish the model on this site. To make it more convenient for everyone to print, I also specifically optimized the model and finally provided a complete and cleaned-up version - however, the printing effect of this version is not particularly ideal.
https://tidiestflyer.deviantart.com/art/The-Knuckles-meme-as-a-3d-model-704695335

The design of the pins/holes is based on Emmett, with a scale of 75%. The entire model requires four pins. Due to the printing direction, the effect of the built-in pins in the legs is not ideal, and I plan to try to improve it later.
I once encountered the problem of normal flipping, but it should have been fixed now. If you encounter similar situations when using certain slicing software, you can easily copy the correct version using the mirroring function.
The total height of the model is slightly less than 100mm.

This print was done using Fargo 3D Printing equipment, and the materials used were 3D-Fuel's "Fire Truck Red" and "Snow White APLA".

Updated on January 19, 2018: Several new leg files have been added. Although the pins won't break easily, they might become slightly loose. To address this, I applied a few drops of quick-drying glue to each pin to further reinforce and ensure their stability.