Kingmann 20 Compartment Multi-Purpose Organiser 18"
Compartment Inserts
These Organisers are available from Amazon but are better priced if you have a local B&M store.

ttps://www.bmstores.co.uk/products/kingmann-20-compartment-multi-purpose-organiser-18-309512
ttps://www.amazon.co.uk/Kingmann-20-Compartment-Multi-Purpose-Organiser/dp/B01NBA9KIO

Version 1 is 66x66mm and 51mm high
Version 2&3 are 72x66x51
The only difference between 2&3 is a reduced radius on the base from 3mm-2mm I got a couple of bad prints with 3mm. This is probably because my printer is not fully dialed in but the 2mm radius worked better.

The two vail racks hold 16 5ml vails cheaply available on ebay
"5ML Small Bottles Vials Storage Containers"
ebay.co.uk/itm/384303987683?var=652497608998&hash=item597a4d7be3:g:4b4AAOSwYR5hBOsG

Version 3 of the Vial rack has a built in handle. When printing multiple parts the shaft created really bad stringing.
Version 7 has a separate shaft which is pushed in after printing. I put the shafts in whilst the base was warm as it is a tight fit and once cool it binds really well.
This is the first time I have used Fusion 360 and I hope the hours I spent making these inserts benefit more than me.

Creality

Ender 5

No

No

200

38

No Post processing.

First project in Fusion360