23.07.2025 Update

• In case if You find brackets quite brittle for some reason, I have added profile with reorianted one at Original paint rack model. You can find it here:
  https://makerworld.com/en/models/91243-upgraded-modular-paint-rack-shelf#profileId-97580
  All you need is to use a bit of glue here, but in means of strength this one should be much more durable. At a moment I have done this way only Vallejo / Army Painter Bracket and if it will show very good results I'll do the same with all other brackets as well. 

This is a Remix or better to say Addon for my Original Upgraded Modular Paint Rack/Shelf model. This Addon is a Bracket Adapter so You can use a Paint holders from Original model and additional Holders I have made for that Paint Wall. They can be found here and here .

Should be easy to print. Use a Snaps (But I would recommend to use a Weight Bearing Snaps or Tight Snaps) to connect Bracket adapter to the Multiboard.

You can Buy me a coffee if You want to support me even more in my work here :)

https://www.buymeacoffee.com/warlogh

(And very Big Thank You For interest in my work)