Summary

Solder Station

This is a soldering station I put together, with the 3-D printed parts.
I drew up 3 different shaped base parts to print and the other parts were bought. The arms are pop together Lubrication tubes that I repurposed for the soldering station. The arms allow for a full range of motion to hold the wires I wanted to solder. I also printed a simple vice to hold the parts that have the wires soldered to. The bases and one part of the vice are screwed to the wooden base plate. The other part of the vice is floating with 2 10-32 by 2” for tightening the vice against the part being soldered. Base and alligator clips were hot glued to the tubes.
30CM Plastic Flexible Adjustable Water Oil Coolant Pipe Hose Round Nozzle from eBay
Alligator clips from Harbor Freight