Abstract

This is a simple hexagonal pattern that can be enlarged or reduced as needed for testing platform leveling. You can also print the model thicker, then heat it to a softening temperature, and wrap it around the surface of other objects, such as vases.

1. Adjust the scale according to the size of your print bed.
2. Set the Z-axis height to the layer height multiplied by the number of layers you want to print
3. Be sure to confirm the direction of rotation of all the adjustment knobs on the print bed.
4. During the printing process, if the height of a certain area is too low or too high, you can adjust it by turning the adjustment knob. If the movement is too large and affects the operation, it is recommended to reduce the printing speed appropriately. This operation is at your own risk, so please proceed with caution.