Bathroom shelf with blocking accessories. It can be easily fixed to a wire mesh panel

Please first confirm the grid size of the panel you are using with the "tester.stl" file - this file provides options for 7 different specifications. Then download the corresponding "caddy_base"

https://youtu.be/KDPakp7DprU

[Japanese]

This product is a matching part specifically designed for creating a bathtub bookshelf using the wire mesh grids of 100-yen stores

First, please output the "tester.stl" file and carefully check the grid size of the actual panel. Since there may be some deviations in the grid spacing, it is necessary to pay attention to it. Then, download the matching "caddy_base" component. The "caddy_stopper" accessory can be used for all size specifications.
Moreover, there's no need to add any support structures during printing.

Please note that the length of the long side of the wire mesh grid must be greater than the width of the bathtub, so it is recommended that you measure the dimensions in advance before going to purchase. Additionally, if the short side is too long, it may cause inconvenience when taking a bath. Taking my small bathtub as an example, the 62×19cm grid from Daiso is just right