This is a remix of SeeMeCNC's mount located here: https://seemecnc.dozuki.com/Guide/RostockMAX+v3.2+Touch+Screen+KIT+Intallation+REV+B+MAY2018/105?lang=en

During the reassembly of my Rostock Max v3 after upgrading to the Rostock Max v3.2, I managed to crack an acrylic panel. SeeMeCNC sent a new panel but I decided I didn't like the mounting location for the PanelDue touchscreen as it interfered with my enclosure. This new location did require new cables, I made a longer 4-wire cable using the Dupont connectors included in the DuetWifi kit but I did have to order a longer ribbon cable for ~$6.

I printed this in ABS for rigidity with enough flex to install it.

Additionally, this mount will save anyone else doing the v3 to v3.2 upgrade from the need to drill new holes in their laser cut panel.

SeeMeCNC license: https://seemecnc.dozuki.com/Info/Licensing

Original Model: https://github.com/seemecnc/Machine_Elements/blob/master/83229%205%20inch%20touch%20v32%20mount/83225%20Frame%20Mounting%20Post%20MAY%202018.STL

Prusa

i3 MK3

No

Yes

.2mm

20%

Printing in the default orientation, supports will be needed everywhere. If rotated 90 degrees, supports may not be needed. I used a fill to clean up the supported areas.