Created this planter based on this Buddha head sculpture from sketchfab: https://sketchfab.com/3d-models/buddha-shakyamuni-8th-c-ce-582f777c0ff24cb49cab20d963da59f0

It fits an 11cm plastic pot (11cm top diameter, 9cm height).

Sliced with Cura 4.9.1:

• 0.2mm Layer Height
• Fuzzy Skin (0.15 Thickness, 10.0 Density)
• 12% Infill with 3 Gradual Infill Steps and 2.0mm Gradual Infill Step Height
• Tree Supports with 60° Support Overhang Angle

It took about 40 hours and ~350g.