3D-Printed Fishtechy Proft Ball – DIY Version

Save money! No need to pay €35 for two plastic balls—just print and paint them to match the original.

Printing Instructions:

✅ Recommended Material: ASA or PETG 
✅ Infill: 15-20% (for a good balance of strength and weight)
✅ Supports: YES (necessary for the curved underside of the ball)

Type: Tree supports (less material waste) or normal zigzag

Overhang Threshold: 50–55° (helps reduce support blobs)
✅ Layer Height: 0.2mm for smoothness (or 0.3mm for faster printing)
✅ Brim/Raft: Optional (helps with bed adhesion if needed)

Post-Processing:

🔹 Sanding: Lightly sand for a smoother finish before painting.
🔹 Painting: Use matte or semi-gloss spray paint to match the original Fishtechy colors (likely white/orange or other bright tones).
🔹 Rope Attachment: Insert a 4-5mm rope through the pre-modeled hole—secure with a knot or a drop of glue if needed.