This is a light weight cam type pulley and mount for a flying stab on a VTPR RC type glider and the cam for the servo. It allows for 90 degee rotation on RC gliders like Le Fish, Vagabond or adding flying stab to a DreamFlight Ahi glider. It mounts directly to the stab with no screws and is one peice and the other mounts directly to the servo. You may need to lightly press it on the servo and then use pressure and the screw to pull it on. On a pull pull system it requires another CAM mount pulley mounted 90 degrees rotation relative to the other. On level flight the servo pulley is horizontal and the elevator pulley is vertical on the long side.This adds mechanical expo and has fine control near neutral but max throw at the extremes. The servo pulley with 12g servo mounts so no extra screws or bolts are required.

Anycubic

All-metal Mega

No

Yes

.1

30%