Update 11/16/2017: Wow guys, thanks for the love! This Thing quickly became one of the most popular I've put up. I'd love to see some Makes if any of you are printing them! Looking forward to seeing these on your hoodies, especially Tesla hoodies. ;)

This is an accessory that can be threaded onto a hoodie drawstring to prevent the string from being pulled up into the abyss that is the hood.

Installation
Push the plastic-encased end of a drawstring through the top hole and push it all the way in. A tiny screwdriver can be helpful for this. Once the end appears at the other end of the part, it can be pulled the rest of the way with a pliers, needle-nose works best.

Part can be threaded all the way onto the string, or left on the end.

If the part fits loosely or the hole is not big enough, I will be willing to upload a file with a differently sized hole if you can tell me how much bigger or smaller it needs to be, and you ask me nicely :)

Printing
It is best to print this part using ABS or another material with high heat tolerance due to the tendency of hoodies and jackets to get left in cars that may become excessively hot inside, and PLA won't stand up to that environment.. Best results come with a glass bed, as the rough finish caused by buildtak can make your piece look unfinished if you don't finish it yourself.

I found it best to print with supports and without raft. Supports are easily removed with a needle nose pliers and a tiny screwdriver to poke into the hole.

Precautions
Remove the stoppers before washing or drying (or any other environments with high temperatures) to avoid melting the part and posing a fire risk.

Many thanks to Lucatrop for modeling the logo I remixed for this Thing!