This is my first 3D model, so let me know if you have any feedback on things I could do different.

I have a Sonoff SV that I'm using for a project, but it's just been sitting on my workbench. I wanted to have the ability to mount it to my backboard along side some of my network gear and other misc IT stuff, so I came up with this in OpenSCAD.

This was designed using the HELIFOUNER 560 Piece M2.5 kit - https://a.co/d/6cpXWyb
4- M2.5 x 10mm screws
4- M2.5 Nuts

2- #6 x 5/8" (3.5mm x 16mm) Pan Head to mount to the wall
(I used Spax [https://a.co/d/aiKpYgu], but any #6/3.5mm Pan Head should work)

The hexagons (are the bestagons) are there to help reduce the amount of material used.