remix of https://www.printables.com/model/516104-hollok-knight-hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 

The Model is 200x187.38mm in size 
You may print at higher layer heights below the Base Thickness of 0.48mm 
The Max allowed Thickness is 2mm and the Actual Thickness is 2mm 

Filaments Used: 
PLA Flashforge White Transmission Distance: 10 
PLA+ Esun Bone White Transmission Distance: 4 
PLA Panchroma Translucent Grey Transmission Distance: 6 
PLA PolyLite Black Transmission Distance: 0.3 

This print uses 4 unique filaments Swap Instructions: 
Start with White 
At layer #8 (0.72mm) swap to Bone White 
At layer #14 (1.2mm) swap to Translucent Grey 
At layer #20 (1.68mm) swap to Black for the rest.