This is a Tool Tray for the Prusa MK2s Multipurpose Platform. It has 4 screw holes to attach it to the MPP, sized for M3x10 (Multiplexer spares :D). It provides space to put in tools frequently used when working on the printer and it has an area to place screws so your work space stays organized.

There's a version to mount it on the left or on the right side and the filenames are labeled as such. It has quite a thick bottom (5mm) so the 10mm screws can sink in completely, you might want to cut away 3mm if you have M3x7mm screws lying around.

Note: you will need the corresponding Platform (V2 or OLD) to attach this Tray to the Prusa, which you can find here: https://www.thingiverse.com/thing:2647792

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.15

Infill:

Notes:

The box shown in the pictures was printed with PLA, 4 Vertical Shells and 4 Top- and Bottom Layers

Category: 3D Printer Parts