Eye for a Dalek mk3 with white ring. Designed to fit onto a 30mm stalk.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.16

Infill:

Notes:

The body can be printed face upwards, as orientated in the file, with 20% infill and support (needed for the first few layers).

The tube through the back is around 55mm deep and has a conical end at the top with 45 degree slopes, which should not require any support during printing. This fits an eye-stalk of 30mm, which matched the pipe on my model. The hole is slightly oversized and I used a few pieces of paper to wedge mine rather than glue.

I suggest enabling ironing with a concentric pattern to get the shiny front face.

Category: Robotics