It took the campaign seven levels, but finally my players are coming up against zombies. At this level I can really go all out with the hordes, which is exciting!

For this model the peg to slot into the base is also the chewed leg, so a little extra care should be taken to avoid injuring this poor zombie even more.

28Chibi is a new generation of minis made to be printed flat on the bed. Inspired by the likes of DutchMogul's DungeonDoll's and GrumpyRobot's FlatMinis, These:

• Print quickly and reliably on high- or low-end printers alike.
• Are sized for 28mm games such as D&D, Pathfinder, Shadowrun, Starwars EofE etc
• Storage is space efficient and safe due to the flat-pack & peg-and-hole base design (The peg is 2x2mm, so if the included base is not to your liking adding a slightly larger hole to your preferred base is a quick modification.)
• The hands are designed for modular equipment, and should generally also accept objects designed in the FlatMini style. The detail steps up in increments of 0.6mm, allowing for a variety of different layer heights to still print these crisply. 0.2mm is my go to, but higher or lower values (such as 0.1, 0.12 or 0.3) all work great too.