A wallet multitool with a school friendly box opener, fidget spinner, compass, phone stand, ruler, and USB drive.

Printed out of fiberon carbon fiber petg at 20% infill

recommended settings:

20% infill

Any filament except silk PLA

0.2 mm layer height

needs a bearing with a 5mm ID and 11mm OD, can be found here https://www.amazon.com/MR115-2RS-Groove-Bearings-Pre-Lubricated-Miniature/dp/B0D5DF1HLS?gQT=0 or 3d printed from one of the many good designs.