10 inch Serverrack, covers and base

Status: UNTESTED

This Thing combines multiple covers, brackets and baseplates for a DIY 10 inch rack. For the rails, various lengths can be used. Also standard power supplies or other devices with premounted brackets with a width of 10 inches (e.g switches or routers) can be mounted to the rack.

How to build

Take 4 rack rails of the same length and screw them onto a baseplate. Now take a second baseplate and screw it to the top of the rails. Optionally you can add felt gliders to the bottom of the lower baseplate.

Needed material

2x baseplate
4x rack rails: 2pcs server rails
8x screws with cage nuts: 50pcs cage nuts

Optional modules

All modules in this Thing have a width of 10 inch and can be mounted to the rack. They are named by the part and the height in Units (U).
Please have in mind to add supports for the cablemanager before printing.
The tray can be secured to the front and back rail for higher stability.

Other Information

Length: 254mm
Width: 254mm
Height: Units*44.5mm+4mm

Is your 3D-printer too small? Don't own a 3D-Printer? I can help you out! All printed parts are available on my Ko-fi!