Surface 3 Pro power supply case
Lucia Atkinson
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2026-03-07 12:05:25
0
0
000Descripción
Etiquetas
Fuente del modelo
Comentarios(0)
I have a refurbed Microsoft Surface 3 Pro. , the power supply was not the OEM with the extra USB in front.
I had one of the right one, but sadly the capacitor was bad. This is not something there are impossible to repair but after that, the plastic case looks like a wreck.
I have made this new case for the supply. They are two models: the first no 1 have a slit inside the case to the screw, No 2 has more beefy surroundings around the screws.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
200
Infill:
20
Filament: Fiberlogy easy PET-G PET-G Your choice :-)
Notes:
The blue case is printet in Smartfill PLA it's nice but I have some concern about PLA for a 230V PSU. Next was printet in PET-G
Use M3 screw, and a 3M Tap for prepaire. The lids hole can be drilled up to 3mm, if too tight.Etiquetas
Fuente del modelo
Enlace original: Ver detalles
CC-BY