Designed to fit a 1.5 inch by 1 inch rectangular table leg

Printing:

printed with .5mm nozzle, 20% infill, at .2mm layer height. using the hatchbox blue pla, nozzle temp was 200 and bed temp of 65 using a brim for adhesion though it may not be necessary

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: hatchbox PLA blue Post-Printing =============

How I Designed This

Fully drawn up in Fusion360 and sliced with Ultimaker Cura

Category: 3D Printing