This mount will secure a 19x19 backpack style VTX to a 20x20 stack with M2 screws. It measures 25mm x 25mm and 3mm thick. Use spacers to elevate the mount in the stack. Note that this was designed to be the top of the stack with one hole being shared between the VTX and the stack screw. The M2 holes are small to allow for the screws to thread itself into the hole securing it. Use M2 tap screws to secure the VTX.

The mount is meant to be printed in TPU at 0.1 resolution.

Doesn't Matter

No

0.1

100%