This is a remix of https://www.thingiverse.com/thing:3877505 and i changed some dimensions because the tools that comes with the Ender 3 V2 won't fit properly.

• I got rid of the two additional screwdriver holes and the feeler gauge holder.
• I changed some tolerances of the grooves because the original fit was to lose. My design is a really tight fit with a tolerance of less than 0µm (you will need high force to put it on).
• I changed the slot of the scraper because the original one won't fit the tool properly
• I widened one slot for the single wrench because it was to small
• I got rid of the hook because i don't know what it is for

I uploaded three files:

• one with the deleted slots/holder mentioned above
• one that is shortened due to material saving but keeping text
• one completely shortened without text
• a cad file of the original holder modified by me (if you want to modify more)

Make sure to set the angles of the supports to 80°. If you have trouble printing this, use my settings down below.
My frame thickness of the 20x20 alu-profil is 1.52mm (groove) so make sure you have the same dimensions

Creality

Ender 3

No

Yes

0.2

20%

density of supports: 45%
angle of supports: 80°
z-distance of supports: 0.1mm
type of supports: normal
area of supports: everywhere
pattern of infill: triangles