Design for this print is to be used with 10mm~ M3 wood screws with washers to add surface area. M2.5 machine screws will also thread in fine, M2 screws might work. Warping may occur at the outer ends if filament cools off too quickly.

This design first started out as a means to hold many USB drives in a small 1in space. As I have a multitude of bootable USBs that need to sit somewhere. I made a variant for a pegboard for a few others to use.

Everything sits at a 15-degree angle to prevent things from falling out. I tried my best with the spacing to allow room for your fingers to grab the objects stored.