Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 142.68x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 3mm and the Actual Depth is 2.6mm

Filaments Used:

    PLA JAYO Black Transmission Distance: 0.3

    PLA JAYO Grey Transmission Distance: 1

    PLA KINGROON Silver Transmission Distance: 5

    PLA SMARTMATERIALS White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

    Start with Black

    At layer #9 (0.8mm) swap to Grey

    At layer #15 (1.28mm) swap to Silver

    At layer #21 (1.76mm) swap to White for the rest.