For a review/overview video on the Analog Discovery 3, I wanted to tear one down rapidly. But, being a $400 device, I decided to model, print, paint, and bust a prop instead.

Nothing about this design is to spec. I modeled it roughly the same size, but I made no attempt for accuracy. For example, the Digilent logo is too small.

The pieces glue together. Print the frame “upside down” so the lip does not need supports.

Utlimately, I had to do some painting and resin fill to get it a finished look with the proper colors. 

Check out the video if you're interested in the AD3. It is a good follow-up to the Analog Discovery 2.