I'm new to 3D design and
I wanted to create some indirect light using LED stripes as they are cheap, easy dimmable and I also had some extra parts laying around anyways.

These are first print photos so I used Aluminum tape for the mirrors that turned out actually quiet good. 
Later on, I would like to try out some paint, too.

LED don't need to be mounted as they are strapped around the inner frame of the mirror.
It was designed to carry 30 cm of LED stripes.
Thats 6 segments or 18 individual LEDs.

For mounting I used some regular wood screws and for the middle plate some 3x12mm Plastic screws.