Vertical stand with adjustable depth for use with straight rails, angled rails, hooks, bumpers, and more.

The “foot” of the stand attaches to the “base” of the stand using:

• Four M5x20, M5x25, or M5x30 countersunk screws

• M5 heat set inserts

Printing Instructions

Print in your preferred material with as much infill as you like, but here are some print settings recommendations:

• 20% or higher infill should be plenty strong

• Supports disabled

Once configured:

1. Print the model on its side, with no supports.

2. Take it off your print bed when it's done. Boom.