After making a cantenna from this fine page https://discussions.flightaware.com/t/three-easy-diy-antennas-for-beginners/16348/3 I needed to mount it outside.

I also wanted to protect myself from the sharp edges of the can so I have designed the mount so that the can is recessed into the mount. The can mount screws onto the post mount with 3mm stainless steel screws.

Printed in ABS as its outdoors.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

.28

Infill:

Filament: ESUN ABS White

Category: Electronics