Wall mounted bed scraper
PeachWind02
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2026-02-21 09:32:13
0
0
000Descripción
Etiquetas
Fuente del modelo
Comentarios(0)
This Is a scraper that I designed to mount on the inside of my printer enclosure. the scraper is held into the mounting plate with friction and it uses standard razor blades that you would put into a box cutter.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
35%
Filament: Hatchbox PLA OR ABS Blue
Notes:
ABS is preferable for this application but I chose to use PLArnrnI used M3 heat-set inserts to attach the cover to the mounting plate, you can most likely use an M4 Screw and self tap it into the mounting plate.rnrnThere is a .2mm clearance between all the parts and the scraper so there shouldn't be any clearance problems.rnrnIf you have any questions feel free to comment.
Etiquetas
Fuente del modelo
Enlace original: Ver detalles
CC-BY-SA