BOB strollers are wonderful and allow you to take your littles nearly anywhere. Their tires are really just tiny bicycle tires with air filled tubes. This makes the so very versatile. This also means in Colorado, goat-head thorns can easily penetrate and give you a flat when you're several miles out with kids. Green slime in the tires helps, but having a pump has also gotten us out of sticky situations in the past. The problem is, the BOB's stroller pockets are quite large, and when you fold the stroller, small items like a compact pump fall out.

These tiny connectors will help keep the pump available, while preventing you from losing the pump when stowing and un-stowing the stroller.

Placement

Doubling up with the small adapters

There is a tubing frame that is below the cover. You can place these clips on either side of the screw that is on this tubing. This method allows even less material to be used while providing stability and placement that is out of the way.

Single Larger Adapter

This mount can be used in the same place, but will have to be placed beneath the screw. This may provide better or worse clearance depending on your pump.

This larger mount is a stronger connection and is probably more ideal when placing the pump on the bottom frame tubing by the wheels / foot locking mechanism.

Printing

Couldn't be simpler, no supports or anything necessary. If you print in PLA you can go faster than I did with PETG and my settings also modify travel for stringing, with PLA you won't have that concern and the print can be done in about 20 minutes.