Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.3mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Prusament Galaxy Purple Transmission Distance: 4.7
PLA Prusament Lipstick Red Transmission Distance: 3.3
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA Prusament Ms. Pink Transmission Distance: 4.1
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #5 (0.52mm) swap to Galaxy Purple
At layer #9 (0.84mm) swap to Lipstick Red
At layer #13 (1.16mm) swap to Sunrise Orange
At layer #16 (1.4mm) swap to Ms. Pink
At layer #23 (1.96mm) swap to Jade White for the rest.